ここから本文です
TWO:From this town I got the best connections with233 the West of Belgium, and as a rule I always made my first visit to ancient and pretty Bruges, which was constantly strongly occupied by the Germans. In front of the well-known Halls two small guns had been mounted, threatening the market-square. The same was the case in front of the Palace of Justice, where the commander's office was established. The Government buildings in the market were entirely occupied by the naval staff of Admiral von Schroeder, and dozens of sailors were sitting in the offices, working at their typewriting machines.
Classification by type of system
1natural circulation external heating pipe type
2natural circulation calandria type
3forced circulation type
4falling-film type
5rising film type
6jacket type
7coil type
Classification by method of operation
1single effect evaporator system
2multiple effect evaporator system
3auto-vapor mechanical compression system
4auto-vapor ejector compression system
5multistage flash system

After taking into consideration of the physical and chemical property of solutions, the desired design conditions, and available utilities, we select the most suitable type of system by utilizing our years of experience and excellent results.
In addition, we can offer designs and manufacturing services that take into careful consideration compactness, energy-efficiency, and automatization.

THREE:(1.) In what respect are air and water like belts and gearing, as means to transmit power?(2.) What are some of the principal advantages gained by employing air to operate railway brakes?(3.) Name some of the advantages of centralising motive power.(4.) Are the conditions of working an engine the same whether air or steam is employed?

While standard calandria type evaporation systems are widely used as the typical concentration evaporator by the various food and chemical industries, we have delivered many of those systems as finishing concentration evaporators especially for sugar solutions and starch syrups.

THREE:"What better time could we have than tonight?"Water-wheels or water-engines.
  • Enables flexible operation with little influence from variations in load and raw solution concentrations because of an adequate amount of solution being held within the system. These systems are also suitable for batch type burning evaporators.
  • Concentrations can be controlled within product specifications by the cascade control using the concentrations of concentrated solution and the raw solution supply and also by the arithmetic control of raw solution concentrations, etc. (Result for sugar solutions: 75±0.2wt%)
  • High-viscosity solutions and solutions that may crystallize can also be utilized by installing a propeller in the evaporator as a forced circulation system.
THREE:

This is a process example of a device that continuously and simultaneously concentrates two types of waste liquid with a single high-efficiency steam compressor.

THREE:Maitrank plunged his hands into his pockets."Yes. As the English say, that is about the size of it. Those letters of yours! Oh, oh! The fun I have had out of this. And the magnificent lies!"
  • By evaporating the steam using a mechanical compressor and reusing it, almost no heating steam is alomost required except the time of start-up, so large energy savings can be expected.
  • By combining with a thin film falling heat exchanger that does not raise the boiling point due to the liquid depth, it is possible to utilize the temperature difference of the compressor at the maximum.
  • Since the residence time and heating time are short and the holding amount is small, starting and stopping can be performed in a short time.
  • It will prevent scale adhesion in the can that the evaporator is divided into two parts, and that the supply of the undiluted solution is alternately switched over a fixed period of time to perform heat concentration.